FLW-12/24/40.5 series of Pole mounted SF6 Load break switch

Published in2018-08-30

3885 Views

Detailed description

Product Description

FLW-12/24/40.5 series of Pole mounted SF6 Load break switch is used for rated voltage 12/24/40.5kV, rated current 400A, 630A, 1250A, and 50/60Hz power distribution network, for breaking and closing load current and overload current of power system, it could separate automatically track sections of faulty power distribution line.
The switch csn be used with electronic controller with the latest technology and it could be manual, motor and remote operated. This electronic controller would be installed inside of stainless steel box, suitable for being used in various of climate conditions.
Besides that, wire and wireless modem installed inside control box, it could realize remote/local monitoring and controlling. It's easy and convenient for installation of the switch on pole, and that could reduce construction cost.

Environment condition
- Ambient temperature: max. +50°C min. -40°C
- Altitude: ≤1000m (could also be 2000m, 3500m, 5000m as requested)
- Wind pressure: ≤700Pa(equals to wind speed 34m/s)
- Relative humidity: ≤100%
- Air contamination degree: IV degree
- Earthquake intensity: ≤8 degree
- Not be polluted by corrosive or flammable gas

- No frequent violent vibration or explosive place

Technical Data

Model	FLW-12	FLW-24	FLW-40.5
Rated voltage	12KV	24kV	40.5kV
Rated current	630A	630A	630A
Rated frequency	50/60Hz	50/60Hz	50/60Hz
Short time withstand current	20kA/1sec	20kA/1sec	20kA/1sec
Making and Breaking Capacity
Main Active Load Current	630A	630A	630A
Number of Load-break Operations	400 Times	400 Times	400 Times
Short-time Making Current (peak)	50kA	50kA	50kA
Number of Making Current Operations	5 Times	5 Times	5 Times
Cable Charging Current	25A	25A	25A
Line Charging Current	1.5A	1.5A	1.5A
Closed Loop Circuit Current	630A	630A	630A
Transformer Magnetizing Current	22A	22A	22A
Power Frequency Withstand Voltage Test
Wet Condition-10sec Phase to Phase, Phase to Earth, Across Interrupters	45kV	50kV	70kV
Dry Condition-1min Phase to Phase, Phase to Earth	50kV	64kV	95kV
Dry Condition - 1 min Across Interrupters	50kV	79kV	110kV
Impulse Withstand Voltage Test (1.2 x 50 μs)
Phase to Earth	85kV	125kV	195kV
Across Interrupter	95kV	145kV	215kV
Other Ratings & Specifications
Internal Arc Test	20kA /0.1 sec	20kA /0.1 sec	20kA /0.1 sec
Arc Extinction Medium	SF 6 Gas	SF 6 Gas	SF 6 Gas
Insulation Medium	SF 6 Gas	SF 6 Gas	SF 6 Gas
Creepage Distance (Porcelain Bushing)	380mm	700mm	1055mm
Creepage Distance (Silicone Rubber Bushing)	540mm	700mm	mm
IP Level	65	65	65
Mechanical Performance
Closing/Opening Time	<1sec	<1sec	<1sec
Mechanical Operations (Guaranteed)	10000 Times	10000 Times	10000 Times
Operating Temperature (Manual Type)	-25~+70oC	-25~+70oC	-25~+70oC
Gas Pressure
Nominal Pressure (MPa, at 20°C)	0.07	0.07	0.07
Explosion Pressure (MPa)	0.4~0.6	0.4~0.6	0.4~0.6
Minimum Gas Pressure (MPa)	0.05	0.05	0.05
Gas Leakage Rate (cc/ sec)	≤0.5%	≤0.5%	≤0.5%

Outline Dimension

Dimension (mm)					Mounting Size (mm)	Bushing creepage Distance (mm)	Packing Size (mm)	Weight (KGS)
	A	B	C	D	L×W		L×W×H
12KV	225	500	803	1056	500×125 (390)	500×125 (390)	1100×900×700	105
24KV	300	650	953	1250	500×125 (390)	500×125 (390)	1300×1100×700	145
40.5KV	400	850	1153	1380	700×125 (390)	700×125 (390)	1400×1200×700	165

Other Similar Products

FLW-12/24/40.5 series of Pole mounted SF6 Load break switch
LW36-72.5 / 126 Outdoor HV. AC. SF6 circuit breaker
ZW30-40.5 Series of outdoor high voltage vacuum circuit breakers
ZW20-12 Series outdoor high-voltage vacuum circuit breaker
FZW28-12F series AC high voltage demarcation vacuum automatic recloser

PRODUCTS

FLW-12/24/40.5 series of Pole mounted SF6 Load break switch

Detailed description

Product Description